755211

Abus Secvest - FUSG50110 Manual

45
Zoom out
Zoom in
Previous page
1/168
Next page
Installation
45 | EN
Important
In battery operation mode, the sounder is automatically muted after 3 minutes.
In addition, battery-saving functions are enabled.
Note
The software version of the sounder is indicated by the LEDs immediately after the
power supply is connected. You can find details on this in the chapter "Software
version displayed by LEDs".
Important
Insert the cables into the guides provided. Otherwise, the cables may be crushed.
Step 4b: Pair the sounder with the alarm panel
• If this has not been done already, start operation of the alarm panel.
• Select:
Installer mode -> Components -> Indoor sounder > Add/remove > Indoor sounder 0x
• Select the desired position. Indoor sounder 01 to indoor sounder 04
• You will receive the message "Activate the tamper contact of the indoor sounder". Flick
the tampering switch.
Image 5
• The sounder will then send a pairing signal to the alarm panel. The alarm panel will
recognise the sounder. Once the pairing signal has been received by the wireless alarm
system, it will emit two beeps. The notification "Indoor sounder added" and the incoming
signal strength will be displayed.
• Confirm the successfully completed pairing on the alarm panel.
• On the alarm panel, you can go to
Installer Mode -> Components -> Indoor sounder -> Edit ->
to determine which partitions the indoor sounder should report on. You can also assign
an individual name here.
• You can find descriptions for all further programming in the corresponding chapters of
the Secvest installer manual.
… 45 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Secvest - FUSG50110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Secvest - FUSG50110 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info