755211
42
Zoom out
Zoom in
Previous page
1/168
Next page
Installation
42 | EN
Step 3: Mount the sounder on the wall
Note
The sounder is protected against unauthorised opening and wall tampering contact
via the housing tamper switch and the wall tamper switch. The tamper information is
transmitted to the alarm panel.
Note
A moulded piece in the recess of the backplate (Point 4 Image 3) serves as an anti-
removal wall contact. This moulded piece is fixed to the wall with a screw. If this is not
done, tamper detection for the wall is deactivated.
Danger
If the moulded part is not mounted to the wall, the sounder will lose its certification for
security level 2.
The sounder was designed so that changes are detected if they last at least 400 ms
(EN50131-1 Chapter 8.9.1 and EN50131-3 Chapter 8.9 and Annex B).
Breaking and entering, intrusion and tampering signals must last at least 400 ms.
Image 3
Place the sounder on the wall and align it vertically. Use the base plate as a drilling
template and mark the four fixing points.
Drill the holes in the wall to fit the diameter of the screw anchors. Insert the screw anchors
supplied, in the holes.
Insert the supplied screws through the sounder’s fixing holes. Turn the screws in the screw
anchors. Do not tighten the screws yet. Vertically align the sounder once more. Now tighten
the screws.
42


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus Secvest - FUSG50110 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus Secvest - FUSG50110 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,1 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info