Manual Abus PPIC90520 (page 87 of 88) (German)

719039

Zoom out

Zoom in

1/88

English

8. Troubleshooting tips

Installation distances between the base station and the cameras

The distance between two cameras should be at least 2m. Please install the cameras at a minimum

distance of approx. 1m from the base station to avoid interference.

If you install it outside the range of the base station, you will get a stagnant image or no image at all.

Please check if the signal strength symbol in the live image is sufficient, at least 2 dashes should be

displayed.

Place the base station closer to the camera for a smoother image. The following factors can negatively

influence the transmission: thick brick walls, exterior walls, glass, water pipes and metal.

Camera image is not displayed

Check the signal strength in the live view

Check the battery charge in the advanced settings.

Is the camera connected to the base station?

Is there an internet connection?

Push messages are not received

Is the camera deactivated? Also check the schedules.

Are the push messages deactivated?

Is there an internet connection?

Is the base station unplugged?

How can I set my base station to factory settings?

Press the reset button on the base station for at least 5 seconds. The LED on the front will start

flashing red. Once the factory settings are loaded and the base station is ready for setup, the voice

command "Ready to connect to the network" is issued.

Manual update of the base station not possible.

Please load the update files onto an empty microSD card, take the base station off the power and

insert the mircroSD card. Wait at least 5 seconds before plugging in the base station again.

The base station is not found

Please check the following points:

1. Make sure your network supports DHCP.

2. Are the mobile device and the base station in the same network? Make sure that both devices

are in the same network during the initial configuration.

3. The router has no power supply.

4. The base station has no power supply.

5. Try adding the camera by manually entering the data.

Your Wi-Fi is not displayed in the selection list in the camera app.

If your personal Wi-Fi network is not displayed in the selection list, please check the following:

1. Make sure that the SSID of your router is visible.

2. Change the encryption type of your router to WPA / WPA2 /WPA2-PSK.

3. Is the 5 GHz frequency enabled in your router?

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus PPIC90520 in the language / languages: German as an attachment in your email.

The manual is 2,67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus PPIC90520 Manual

Product: