756353
35
Zoom out
Zoom in
Previous page
1/74
Next page
Setting: Configuration
35
Email Setting
Enable Server
Authentication
Tick the box when logged onto the
internet provider’s server
User name Email account with the provider
Password Password used to protect the email
account
SMTP Server SMTP server address of the provider
SMTP Port Enter the SMTP port
(default: 25)
Enable SSL Tick the box to enable email
encryption
Sender Name of the sender
Sender’s
address
The email address linked to the
email account
Select
Receivers
Select three potential recipients for
the email
Receiver Enter the name of the recipient here
Receiver's
address
Enter the email address of the
recipient
Enable attached
picture
Tick the box if camera recordings
should also be sent with the email as
photo files
Interval Select a trigger time of between two
and five seconds. The pictures will
only be sent if motion is detected
during the time frame defined.
1. Enter the parameters of the email notification.
2. Then click on Test to send a test email.
3. If you have entered everything correctly and have
received a confirmation email, click on Apply.
Note
The device will send an email to the specified
recipients.
If no email is received, check the settings and
correct them where necessary. If necessary,
check the junk mail settings of your email client.
Note
You can obtain the access data and settings for
sending SMTP from your email provider. Some
email providers only provide SSL encryption for
sending emails. This recorder has been tested for
SSL compatibility with the following providers:
GMX, Web.de and Gmail.
SNMP tab
SNMP is a protocol for displaying the network status via
corresponding SNMP software.
SNMP Setting
Enable SNMP Select the checkbox to create a
connection to SNMP software
SNMP Version The version of the SNMP system
SNMP Port Enter the SNMP port
(default: 161)
Read Community
Enter the “Key according to the
settings of your SNMP software.
Write Community
Enter the “Key according to the
settings of your SNMP software.
Trap Address Enter the IP address for the SNMP
manager
Trap Port Enter the trap port (default: 162)
NAT TAB
Network Address Translation is for the separation of
internal and external networks.
Note
SNMP is used for monitoring the device status.
For this you need suitable SNMP software.
35


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus nvr10030 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus nvr10030 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus nvr10030

Abus nvr10030 User Manual - German - 75 pages

Abus nvr10030 User Manual - Dutch - 74 pages

Abus nvr10030 User Manual - Danish - 74 pages

Abus nvr10030 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info