756352
52
Zoom out
Zoom in
Previous page
1/74
Next page
Setting: Recording
52
In the schedule, the hours for each day are listed from
left to right, and the days are listed from top to bottom.
On the right of the display, the colour key can be seen
meaning that in the time schedule set up, the recording
periods are displayed in the schedule in a different colour
depending on the ‘trigger’ (recording type) in question.
Coloured icon Key
Continuous recording:
uninterrupted recording
Event: a recording is made
whenever any type of event
(motion, alarm input or VCA)
occurs.
Recording takes place only upon
motion detection.
Recording takes place only upon
alarm input (local/remote).
Recording takes place upon
motion detection or alarm input
(local/remote).
Recording takes place upon
simultaneous motion detection and
alarm input.
None No recording takes place.
Select the camera and tick the Enable Schedule
box.
Click on a trigger and use your mouse to highlight
the time period within the schedule.
Alternatively, click on Edit to configure the type and
duration of the schedule down to the minute.
1. In the drop-down menu for “Schedule”, select the day
to be set.
2. Activate/deactivate “All Day”. If “All Day” is activated,
you cannot enter specific times as the setting now
applies to the whole day.
3. If you wish to enter specific time settings, deactivate
“All Day.
4. Specify the recording type in the drop-down menu for
“Type”:
Duration
Event
Motion
Alarm
Motion or alarm
Motion and alarm
Event
5. If you are entering time-dependent settings, you can
define up to eight time slots, between 00:00 and 00:00
in each case, but the individual time slots must not
overlap.
Click on Copy to apply these settings to other days or
the entire week.
Finalise your settings on the record screen by clicking on
Apply and then OK.
Parameter
“Parameters” is where the quality settings for the
individual video streams are set up on the recorder.
There are three types of configuration available:
Recording Quality settings for continuous and
event-based recording
Substream Quality settings for the substream,
which is used mainly for the live
image display.
Instant image Quality settings for capturing single
images
Note
If it is not possible to change the advanced
settings for resolution and bit-rate, this means that
the current recorder firmware does not support
this function.
52


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus nvr10020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus nvr10020 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus nvr10020

Abus nvr10020 User Manual - German - 75 pages

Abus nvr10020 User Manual - Dutch - 74 pages

Abus nvr10020 User Manual - Danish - 74 pages

Abus nvr10020 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info