756352
48
Zoom out
Zoom in
Previous page
1/74
Next page
Setting: Camera
48
Parity No standard
Flow Ctrl No standard
PTZ Protocol Select the PTZ protocol
Address Select the camera ID
Note
These settings are only relevant for cameras with
external PTZ control.
Motion
Motion detection is controlled solely using the motion
information on the recorder, which has been detected by
the camera.
If a live image from the camera is displayed in this
dialogue, you can configure the camera's motion screens
directly.
If no live image from the camera is displayed in this
dialogue, all settings for motion screens and sensitivity
must be set directly in the camera's web interface. To set
up motion detection, proceed as follows:
1. Select the camera channel to be processed
under “Camera”.
2. Tick the “Enable Motion Detection” box and
define any other optional parameters under
Settings”.
3. On a PC, open the web interface for the camera
you have selected and adjust the advanced
settings for the motion mask, threshold and
sensitivity.
4. Repeat the process for any additional cameras.
5. Click on Apply to save the settings.
6. If you wish to record based on motion detection,
switch to the “Record” menu item and select the
relevant cameras under “Schedule. Here you
can configure the schedule using the “Motion
event in order to set up motion-detection-based
recording.
7. Click on Apply to save the settings.
Private Zone
Select the camera channel to be processed under
“Camera” and select the checkbox “Enable privacy
mask”.
Use the mouse pointer to drag the desired privacy masks
across the preview.
Note
The displayed settings for motion detection are
basic settings. In the camera's web interface,
detailed settings may be available.
Note
To record with the aid of motion detection, you
must set up the schedule under Record.
Note
For help in programming a Linkage Action via
the Settings button, see the Linkage action
section.
Note
You can set a maximum of four privacy masks.
To delete them, select either “Clear all” or the
desired mask on the right-hand side next to the
preview.
48


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus nvr10020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus nvr10020 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus nvr10020

Abus nvr10020 User Manual - German - 75 pages

Abus nvr10020 User Manual - Dutch - 74 pages

Abus nvr10020 User Manual - Danish - 74 pages

Abus nvr10020 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info