756351
33
Zoom out
Zoom in
Previous page
1/74
Next page
Setting: Configuration
33
Network
The complete network configuration of the recorder can
be carried out in the “Network” menu. The recorder must
be physically connected to the network via at least a
CAT5 cable. To allow for smooth network operation, we
suggest using continuous gigabit cabling between the
recorder, camera and switch.
Note
Having the correct network settings is
indi
spensable for connecting network cameras and
accessing the recorder via remote software
(browser, CMS, app).
Warning
When using a router, the network clients, and
therefore the recorder, are “connected” to the
internet and vice versa.
You should make sure that you take protective
measures, such as using a firewall, changing your
password and changing the port, to prevent
unauthorised external access.
General tab
Settings for the local network and selecting the network
mode are defined here.
General Setting
NIC type Set the transmission speed of the
integrated network card here.
Select “Self-adaptive” so that the
recorder can automatically determine
the best possible speed.
DHCP Tick the box if the IP addresses on the
network are assigned dynamically via
DHCP.
DHCP enabled: subsequent entry fields
are set to disabled because parameters
are obtained via DHCP.
Note:
If the IP addresses are assigned
manually, ensure that DCHP is not
enabled (do not tick the box).
IPv4 address Address of the network device on the
network when assigned manually
IPv4
Subnet Mask
Usually 255.255.255.0.
IPv4 Default
Gateway
Gateway address for internet access
IPv6 Address
1
Local (link local) IPv6 address
IPv6 Address
2
Global (global unicast) IPv6 address
IPv6
Standard
Gateway
IPv6 gateway address for internet
access
MAC
address
Hardware address of the integrated
network card
MTU(Bytes) Describes the maximum protocol packet
size.
Preferred
DNS server
Address of the domain name server,
usually the IP address of the gateway.
Alternative
DNS server
IP address of the alternative DNS
server
Note
In certain modes some of these settings cannot be
selected.
33


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus nvr10010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus nvr10010 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus nvr10010

Abus nvr10010 User Manual - German - 75 pages

Abus nvr10010 User Manual - Dutch - 74 pages

Abus nvr10010 User Manual - Danish - 74 pages

Abus nvr10010 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info