756351
13
Zoom out
Zoom in
Previous page
1/74
Next page
External I/O connections and wiring
13
Alarm inputs
The alarm inputs on the recorder are used for event
control via externally wired detectors (door contacts,
motion detector, smoke detector, light barriers, etc.). On
the recorder side, the inputs can be used to activate a
recording, alert via CMS or send an alarm email, among
other things. The alarm inputs are purely switch contacts
(Normally Open/Normally Closed) which must not be
voltage controlled.
Note
Following the connection of the detector to the
alarm input of the recorder, the behaviour in the
normal state (NO/NC) and the event reaction must
be programmed in the settings menu.
Alarm outputs
The alarm outputs on the recorder are used for the action
control of externally wired devices/actuators (sirens,
lamps, door openers, etc.). The alarm output switching
takes place via integrated relays on the recorder. In order
to prevent damaging the relay/recorder, the device’s
maximum switching power must not exceed the specified
values of 12 V / 1 A.
Note
After the actuator has been connected to the
alarm input of the recorder, the event reaction
must be programmed in the settings menu.
RS-485 output (NVR10030/NVR10040)
The RS-485 output on the recorder is used to control
analogue PTZ cameras.
IP cameras with an integrated PTZ function are fully
controlled via the network.
The use of the interface is intended as an alternative for
the use of IP cameras with external motor control.
Connection
Description
Depending on the recorder model,
1–16 inputs are available. First,
plug the detector contact in an
open input (IN1-16) and then
connect the grounding contact (G).
Connect more detectors in the
same way:
IN1 G
IN2 G
IN3 G
….
IN16 G
It does not matter whether you
connect all detectors to one
grounding contact or divide them
up among the available contacts.
Use terminal blocks in order to
connect multiple detectors to one
grounding contact.
Co
nnection
Description
Depending on the recorder model,
1–8 outputs are available. First,
plug the actuator/device in an
open output (OUT1-8) and then
connect the grounding contact (G).
Connect further actuators in the
same way:
OUT1 G
OUT2 G
OUT3 G
….OUT8 G
It does not matter whether you
connect all actuators to one
grounding contact or divide them
up among the available contacts.
Use terminal blocks in order to
connect multiple actuators to one
grounding contact.
Connection
Description
Connect the PTZ control by using
the Transmit and Receive pins.
Only available on
NVR10030/NVR10040 !
Detector
s
Actuator
_
_
-
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus nvr10010 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus nvr10010 in the language / languages: English as an attachment in your email.

The manual is 14,69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus nvr10010

Abus nvr10010 User Manual - German - 75 pages

Abus nvr10010 User Manual - Dutch - 74 pages

Abus nvr10010 User Manual - Danish - 74 pages

Abus nvr10010 User Manual - French - 76 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info