Manual Abus itac10300 (page 24 of 25) (English, German)

756333

Zoom out

Zoom in

1/25

Connect multiple adapters

If you have problems connecting multiple adapters, please try as follows:

Reset all adapters to factory settings.

Plug all adapters together into a multiple socket.

Press the pairing button (SECURITY or CONFIG for more than 2 sec.) immediately

after each other.

After a short wait two adapters will connect.

It can take up to 1 to 2 minutes for the third adapter to connect.

If the Powerline LED on the third adapter stops flashing and goes off without any

connection, continue with the following steps:

Press the pairing button again at the first adapter of the already paired ones, after

that press the paring button at the third adapter again.

Please note, during the pairing process, the Powerline LED on the ITAC10310

adapter flashes at least 1 minute longer than on the ITAC10300.

If this does not succeed again, the third adapter may be defective.

Please check if a simple pairing with only two adapters is possible to identify the

defective adapter.

WARNING

• Disconnect the Powerline adapter from the power source before servicing

• For indoor user only

• Do NOT open the casing

• Do NOT use near water

• Do NOT insert sharp objects into the adapter’s socket

• Socket maximum output is 15A (ITAC10300)

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus itac10300 in the language / languages: English, German as an attachment in your email.

The manual is 0,33 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus itac10300 Manual

Product: