756213

Abus hdcc78550 Manual

29
Zoom out
Zoom in
Previous page
1/105
Next page
29
En
lish
5.5. Installation on the wall mount
1. First drill the four holes in the wall to attach
the wall mount to the wall.
2. Use appropriate screw anchors and screws
to attach the wall mount to the wall.
3. Screw the round adapter plate on to the wall
mount. Secure the adapter using a side
fixing screw.
4. Attach the installation adapter to the wall
mount.
5. Run all cables through the wall mount and
connect them correctly to the camera
module.
6. You can now carry out the subsequent steps
as previously described in the section on
installation.
The appropriate TVAC31320 wall mount is
required for the installation. This is not included in
the scope of delivery of the camera.
5.6 Installation on a suspended ceiling
The following installation data must be observed:
Installation depth (min.): 50 mm
Diameter of camera insert:
min. 145 mm (max. 152 mm)
Diameter for fixings: 10 mm
1. First, create an opening of min. 145 mm to
max. 152 mm at the desired location in the
suspended ceiling.
2. Glue the drilling template to the opening in
the ceiling in a central position.
3. Drill three holes with a diameter of approx.
10 mm in the places marked.
4. Screw the three long metric screws supplied
through the three outer fixing holes in the
ceiling recessing ring.
5. Then screw the three spreading clamps on
to the three metric screws from the back.
6. Insert the ceiling recessing ring into the
feed-through and the three spreading
clamps into the fixing holes and push the
spreading clamps through the fixing holes.
The spreading clamps should now hold the
ceiling recessing ring to the ceiling.
7. Next fasten the three fixing screws until the
ceiling recessing ring is finally level and
firmly attached to the ceiling.
8. The camera module can then be installed
and oriented in the same way as during the
installation in the installation adapter, and
the dome can be placed on top.
… 29 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus hdcc78550 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus hdcc78550 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 0,8 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info