756208

Abus hdcc72560 Manual

25
Zoom out
Zoom in
Previous page
1/92
Next page
11
English
3.2. HDCC72560
Glue the drilling template provided where you intend to install the camera. Drill the required holes.
Twist the camera cap until the mark on the camera base plate and the groove of the camera cap are
aligned (see image 1). Remove the camera base plate using a flat object (e.g. a coin).
Use the wall plugs and screws provided to mount the camera base plate in place.
If the cable is to be routed through the side, do not fully mount the camera base plate until
the camera and the camera cap are in their place.
Place the camera on the camera base plate and lay the cable through the wall or side. Clip the camera
cap on and align the camera and camera cap.
Alignment
1. Rotation: 0–360°
2. Tilting: 0–75°
3. Panning: 0–360°
3.3. Connecting the video cable
In order to transmit the HD-TVI video signal from the camera to an HD-TVI recorder, an RG59 type
coaxial cable with BNC connector (male) must be connected to the connection labelled 'TVI'. The cable
length to the next device must not exceed 500 m (RG6) or 300 m (RG59).
Please note that the camera's image transmission may be disrupted when laying cable
next to power lines or other conducting materials.
Recommendation:
Use TVAC25220 or TVAC25210 suppressor filters to minimise disruptions.
… 25 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus hdcc72560 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus hdcc72560 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish as an attachment in your email.

The manual is 1,07 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info