692293

Abus FUMO50110 - Secvest Manual

76
Zoom out
Zoom in
Previous page
1/267
Next page
Installation
76 | EN
Step 8: Pair the hybrid module with the alarm panel
• If this has not been done already, start operation of the alarm panel.
• Select:
Installer mode -> Components -> Hybrid module -> Add/remove -> HyMo x
• Select the desired position. HyMo 1 or HyMo 2
• You will receive the message “Activate the tamper contact of the HyMo”. Press the tam-
per switch (see Image 1).
Note
For programming, for test purposes and if the hybrid module is not yet mounted on
the wall, the jumper can be connected to the 2 pins of DISABLE REAR TAMPER.
The wall tamper switch is thus bridged and therefore out of operation.
You now only need to actuate the housing tamper switch.
The jumper is not connected to the 2 pins of DISABLE REAR TAMPER.
You need to close and open the housing tamper contact and the wall tamper contact
(anti-removal wall contact) at the same time to send a tamper signal to the alarm
panel.
Alternatively,
you can keep a tamper contact closed (pressed), and close and open another tamper
contact to send a tamper signal to the alarm panel.
• The hybrid module will then send a pairing signal to the alarm panel. The alarm panel
will recognise the hybrid module. Once the pairing signal has been received by the wire-
less alarm system, it will emit two beeps. The message “HyMo added” and the incoming
signal strength will be displayed.
• Confirm the successfully completed pairing on the alarm panel.
• On the alarm panel, you can go to
Installer mode -> Components -> Hybrid module -> Edit ->
to determine to which partition the hybrid module is allocated. You can also assign an
individual name here.
• You can find descriptions for all further programming in the corresponding chapters of
the Secvest installer manual.
• You can find notes on programming the volume of the loudspeaker in the user manual.
… 76 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FUMO50110 - Secvest at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FUMO50110 - Secvest in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info