Manual Abus FUMO50110 - Secvest (page 73 of 267) (English, German, Dutch, Danish, French, Italian)

692293

Zoom out

Zoom in

1/267

Installation

73 | EN

Note

Observe the polarity of the output, normal or inverted (Secvest programming) in con-

junction with the type setting low or high (wAppLoxx Control programming) combined

with the plus and minus wiring.

Note

Observe the wAppLoxx Control power consumption.

If 500 mA at the “0 V / 12 V AUX” output is insufficient, supply the wAppLoxx Control

directly from the PSU. You must then also observe the maximum current output of the

PSU.

Observe the permissible voltage range of the wAppLoxx Control.

12 V +/-10% = 10.8 V - 13.2 V

You may need to use a separate power supply unit for the wAppLoxx Control.

Note

Note the contact capacity (current, voltage) of the relay.

Note

You can configure the outputs (type, name, partitions, polarity, options) in installer

mode -> outputs -> HyMo outputs

Note

Observe the wiring of the relay NO/COM or NC/COM (wAppLoxx Control) in conjunc-

tion with the type switch on or switch off (wAppLoxx Control programming) combined

with the property of the wired zone, inverted or not inverted (Secvest programming).

Note

Note the zone wiring

The wired zone type can be configured separately for each hybrid module.

The wired zone type applies to all 10 or 5 zones/inputs of the respective hybrid mod-

ule.

You can configure this setting in installer mode -> components -> hybrid module.

Note

You can configure the zone programming (type, name, partitions, properties) in in-

staller mode -> components -> HyMo zones

Note

The wire loop in Z8 is used for tamper monitoring of the connection cable between

the Secvest alarm panel and wAppLoxx Control.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus FUMO50110 - Secvest in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 2,68 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus FUMO50110 - Secvest Manual

Product: