692293
61
Zoom out
Zoom in
Previous page
1/267
Next page
Installation
61 | EN
Step 4: Mount the hybrid module on the wall
Note
A moulded part in the recess of the back plate serves as an anti-removal wall contact.
Image 4
Place the hybrid module on the wall and align it vertically. Use the base plate as a drilling
template and mark the three fixing points.
Drill the holes in the wall to fit the diameter of the screw anchors. Insert the screw anchors
supplied, in the holes.
Insert the supplied screws through the fixing holes of the hybrid module. Turn the screws in
the screw anchors. Do not tighten the screws yet. Vertically align the hybrid module once
more. Now tighten the screws.
Step 5: Wire the hybrid module
Danger
The hybrid module and connected components work with Safety Extra Low Voltage
(SELV) .
SELV < 25 V AC or < 60 V DC
These voltages do not pose a threat to animals or children.
If the nominal voltage is below 25 V for alternating current or below 60 V for direct
current, then there is no need for protection against direct contact with SELV.
The typical alarm system connections are designed for Safety Extra Low Voltage
(SELV).
The circuits of the zones, the circuits of the switch outputs (contact capacity relay
24 V AC rms or 30 V DC) and the 12 V power supply of the ABUS alarm panels and
other components also operate in this voltage range.
61


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FUMO50110 - Secvest at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FUMO50110 - Secvest in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 2,68 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info