756182
13
Zoom out
Zoom in
Previous page
1/16
Next page
BEEP!
BEEP!
2x
BEEP!
BEEP!
2x
10s
5
7
4
6
Trigger the tamper contact
of the detector or send a
signal from the detector.
Once the signal has been
received, the universal
module will assign a new
channel to the detector in
question.
The LED corresponding to
that channel will start to
ash. Once the detector
has been taught-in
successfully, the universal
module will beep twice.
Once all detectors
have been taught-in,
press the 'ESC/DEL'
button twice and the
universal module
will beep at short
intervals.
Repeat step 2.4 to teach-in
additional detectors.
Please note that the detectors, which you have learned in the WAM,
have also to be taught in the Secvest.
Hold the tamper
contact down for
about ten seconds
– two beeps will be
heard.
Teaching-in the universal
module on the SECVEST
alarm panel
OPTION 1
2
1
Teaching-in on
the SECVEST panel:
Wählen Sie -> Errichtermenü
-> Komponenten -> UVM ->
Hinzufügen/Entfernen UVM
Select a storage location with
available space and conrm
your choice by pressing
'Select'.
Trigger the tamper contact of
the universal module – the
alarm panel will audibly
conrm receipt of the message.
Close the
universal module
housing and exit
installer mode.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus fumo50025 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus fumo50025 in the language / languages: English, German as an attachment in your email.

The manual is 1,91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info