756181

Abus fumo50020 Manual

43
Zoom out
Zoom in
Previous page
1/187
Next page
39
Program the function of the accessory module, and finally train the
detectors to the module (or to the wireless alarm system). For
some functions, it is also necessary to make individual settings
over the programming mode on the wireless alarm system.
6.1 Starting programming
To start programming, proceed as follows:
1. Make sure that the cover contact is open.
The green LED for power supply flashes (battery
operation) or lights constantly (PSU). The red fault LED lights
up.
2. Press SELECT.
LED number 1 also lights up blue.
3. You are now in programming mode.
6.2 Menu items in the main menu
The main menu contains the following menu items:
1.
Train detector
->
LED 1 lights up.
2.
Delete detector
->
LED 2 lights up.
3.
Select channel
->
LED 3 lights up.
4.
Test signal strength
->
LED 4 lights up.
5.
Set outputs
->
LED 5 lights up.
6.
Not used
7.
Select function
->
LED 7 lights up.
8.
Reset
->
LED 8 lights up.
Press SELECT to change between menu items in programming
mode. The display moves one menu item further with each key press
and returns to the top after reaching the last item. The display
of LED 6 is skipped here.
6.3 Selecting the functions on the WAM
The accessory module combines seven different functions, of
which one must be allocated. To select a function, proceed as
follows:
1. From the main menu, press SELECT repeatedly until LED
7 lights up (select function).
2. When LED 7 lights up, press SET once. You are now in
the submenu of the menu item 7 (select function). LED 1
lights up.
3. Press SELECT repeatedly until the LED of the desired
function lights up.
Note: If you wish to allocate a new function to a programmed
WAM, then all previously trained detectors are deleted.
… 43 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus fumo50020 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus fumo50020 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 2,86 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info