Manual Abus fumk50010b (page 54 of 64) (English, German, Dutch, Danish, French, Italian)

755912

Zoom out

Zoom in

1/64

Connecting external contacts

External contacts can be

connected via DEOL to this

opening detector.

Two or more devices must be

connected in series.

The cable length must not

exceed 10 metres.

Connect the external devices to

the screw clamps on the PCB.

Pay attention to the resistance

values.

Training external contacts

The external contacts of the

wireless opening detector are

trained for an extra zone of the

system:

1. Switch your wireless centre to

learn mode. Observe the

system instructions.

1.1. Connect both screw clamps

on the screw clamp block with a

2K2 resistor.

1.2. Remove the resistor to

trigger wireless transmission.

OR:

1.3. Connect the external

contact to a detector and open

the tamper protection.

1.4. Check that the alarm centre

has recognised the detector.

Activating/deactivating LEDs

Connect the jumper to contact

LK3 to activate the LED.

Remove the jumper to

deactivate it.

Using detectors as wireless

modules

This wireless magnet contact

can also be used as a

wireless module.

1. Close the jumper connection

LK2 (Fig. 1, Pos. 2) to deactivate

the internal magnet contact.

Connect the external detectors

to the clamps of the screw clamp

block and train them (see

“Connecting external contacts”

and “Training external contacts”).

FUMK50010W/B

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus fumk50010b in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 1,41 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus fumk50010b Manual

Product: