Manual Abus fubw50020 (page 27 of 110) (English, German, Dutch, Danish, French, Polish)

755904

Zoom out

Zoom in

1/110

Walk test

The range of the detector increases without the front cover on. This is why it must be

replaced for aligning the sensor correctly and for testing the outputs. Adjust the range using

the following table and pan and tilt the lens module over the area to record the entire

space. Press the program button to light up the red display and the pulse counter is set to 1

automatically. The device can now be aligned. The red display on the outdoor motion

detector lights up with any detection. This test module is terminated automatically 5

minutes after the last detection. You can also disconnect the power supply and start the

test module again.

Aligning and masking

In the outdoor motion detector, the multifunctional lens produces 7 long range beams and a

curtain of 7 beams at medium to short range. Movements across the beams provide the

best response and the largest detection range, while movements in the direction of the

detector have a weaker performance result. The device detects temperature changes and

movements in the beam grid; therefore objects such as trees, bushes, ponds, heat

exchange from air-conditioners and animals need to be taken into account when

positioning the detector. The detector module has two sliding panels to reduce the

scanning angle. Additional diaphragms are supplied to restrict the beam grid even more

(for example if a minimum scanning angle of 10° is required).

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus fubw50020 in the language / languages: English, German, Dutch, Danish, French, Polish as an attachment in your email.

The manual is 0,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus fubw50020 Manual

Product: