579993

Abus FU9090 Manual

18
Zoom out
Zoom in
Previous page
1/56
Next page
18
Reading the sounder
After programming the sounder, you have to read it in. You do this by sending a
signal from the sounder to the system. Select one of these functions:
• Press [1] to read in another sounder ID.
• Press [2] to read in the selected sounder. After pressing [2], you have 255
seconds to send a signal from the sounder to the system. To send this signal:
a. Press the reset button on the sounder PCB for ca. 3 seconds.
b. After you release the reset button, you her a short beep and the
external sounder flashes briefly. You now have 10 seconds to press
the tamper contact of the sounder and keep it pressed for at least 3
seconds.
If the sounder is successfully read in, a confirmation signal is emitted.
• Press [3] to delete a sounder from the system.
• Press [4] to select whether the sounder is to be supervised or not.
[9] [2] Parameters
Under Parameters, you program the function characteristic of the sounder.
To access the Parameters menu:
1. In the programming menu, press [9] to access the Siren menu.
2. Press [2] to access the Parameters menu option.
3. Enter the ID number of the sounder you want to program and press [#].
NOTE:
On internal sounders, you can only adjust the volume.
Parameters
Quick-Key Menu option
[9][2][1]
Strobe control
Defines the duration of the visual signal.
[9][2][1][1]
Always off
Visual signalling is deactivated.
[9][2][1][2]
Follow bell
Visual signalling is activated together with audible signalling.
[9][2][1][3]
Follow alarm
Visual signalling is activated on alarm.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FU9090 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU9090 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info