554031
56
Zoom out
Zoom in
Previous page
1/96
Next page
8-56
Authority Levels
The Authority Levels menu option contains settings for the following authorities:
Grand Master: There is only one Grand Master in the system. The Grand Master can carry out all available user functions. The
Grand Master code is defined as PIN code user 00.
NOTE:
Under System Control, you can define that the Grand Master can change authorities as well as areas permitted for users.
See under Grand Master Authority/Partition (press [1] [2] [27]).
Manager:
There is only one Manager in the system. The Manager is defined as Code user 01. The Manager can change all
user codes except that of the Grand Master. The Manager has access to all functions listed below, with the
following restrictions:
Changing the Grand Master code
Performing the walk test
Master:
There is no restriction on the number of Masters (as long as they do not exceed the number of codes remaining
in the system).
The Master has access to all Manager privileges with the following restrictions:
The Master is restricted to defining and changing user codes at the level of Master or below (user, arm
only, maid).
The Master has restricted access to defined areas.
User:
There is no restriction on the number of User PIN codes (as long as they do not exceed the number of PIN codes
remaining in the system).
A user can:
Activate/deactivate
Omit zones
Access defined areas
View the state of the system, faults and the alarm memory
Activate defined switch outputs
Change his/her own user PIN
Conduct selected system tests but no walk tests
Arm Only: There is no restriction on the number of Arm Only PIN codes (as long as they do not exceed the number of PIN
codes remaining in the system). Users with
Arm Only PIN codes only have the authority to activate one or more
areas.
Maid:
A PIN code with the Maid authority is a temporary user PIN that is deleted by the system immediately after being
used for an activation. User PINs with this authority are used as follows:
For a once-only activation in one or more areas
The user PIN can be used the first time to deactivate the system and then to activate it.
UO Only: A PIN code with the UO Only authority is used to activate/deactivate a switch output manually.
User Unbypass: A PIN code with the User Unbypass authority has access to all user authorities except omitting zones.
56


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FU9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU9000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus FU9000

Abus FU9000 User Manual - English - 56 pages

Abus FU9000 Installation Guide - German - 96 pages

Abus FU9000 User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info