554031
38
Zoom out
Zoom in
Previous page
1/96
Next page
8-38
Parameter
Quick-Key Parameter Default Range
IMPORTANT INFORMATION:
If you selected one by one to program the zones individually, you are guided step by
step through the programming points for the zones.
To save settings for the zone, you have to work through all menu options. If you exit
programming early by pressing the star button, your settings are not saved.
After working through all menu options menu, press . A 1-second tone sounds and
confirms that your settings for this zone are saved. You go automatically to the next zone.
Zone 33 (wired zone)
Zone 33 is defined in the ABUS wireless alarm system as a wired zone. For this reason, it
has two extra parameters following the
Zone sound menu item that are applicable to this
wired zone only:
Zone termination
Zone loop response
Zone termination
A wired zone is monitored using a weak electric current. The electric current is defined by
the resistor used. You can terminate a zone as follows:
N/C: (= normally closed) a zone termination is not necessary. It is important to
use detectors that open the circuit in the event of an alarm.
EOL: (= single resistor) a zone termination with a resistor (2.2kOhm / red, red,
red, gold) is required. It is important to use detectors that open the circuit in
the event of an alarm.
DEOL: (= double resistor) a zone termination with two resistors (2.2kOhm /
red, red, red, gold) is required. One resistor is inserted parallel to the tamper
contact of the detector. It is important to use detectors that open the circuit in
the event of an alarm.
N/O: (= normally open) a zone termination is not necessary. It is important to
use detectors whose circuit closes in the event of an alarm.
To see how to wire a detector, see page 5-18.
NOTE:
For more information, see the wiring notes at the beginning of these instructions.
Zone loop response
Under zone loop response, you program the time that the wired zone has to be open
(closed) before an alarm is triggered.
The following options are available:
1) Normal: 400 ms (milliseconds) 7) 2 hours
2) Long: 1 second 8) 2.5 hours
3) Fast: 10 ms (milliseconds) 9) 3 hours
4) 30 minutes 10) 3.5 hours
5) 1 hour 11) 4 hours
6 ) 1.5 hours
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FU9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU9000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus FU9000

Abus FU9000 User Manual - English - 56 pages

Abus FU9000 Installation Guide - German - 96 pages

Abus FU9000 User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info