554031
15
Zoom out
Zoom in
Previous page
1/96
Next page
6-15
6.2 How do I install the ABUS wireless alarm system?
The ABUS wireless alarm system is mounted on the wall in three steps. You need a flat screwdriver to open the casing. A battery-
powered screwdriver is best suited for drilling the holes for the fixing screws. You can then use this screwdriver to screw the fixing
screws into the wall.
Proceed as follows when installing the
ABUS wireless alarm system:
6.2.1 Preparing the base plate
Loosen the casing screw in the middle of the base. When delivered, the case is not yet screwed together.
Separate the faceplate and the base plate with a flat screwdriver as shown in the graphic.
Carefully fold the faceplate upwards. To avoid destroying the fixing clamps on the top of the faceplate, make sure you do
not bend it up more than 45°.
Now draw the flat cable out of the fixing on the base plate.
The base plate and the faceplate are now separated. Place the faceplate to one side.
Now pull the battery lid out of the base plate.
Carefully fold the fixing clamps for the PC board outwards and pull the PC board out of the base plate.
6.2.2 Assembling the base plate
The base plate can now be used as a drill template for marking the drill holes. 6 different drill holes are provided. At least 4
have to be used to enable stable mounting of the
ABUS wireless alarm system on the wall.
Never drill the holes through the base plate since this could destroy the plastic of the base plate. Remove the PC board so
that you can mark the drill holes.
Drill the holes and insert wall plugs if necessary. Fix the base plate to the wall using M4 screws at least 35mm long.
Before screwing the base plate to the wall, remove the cable openings for telephone and power cables with side-cutting
pliers (see sketch). This is not necessary if the cabling is fed through the back wall.
Adjust the lid contact (tamper) according to the triggering behaviour you require: The tamper contact is on the rear of the
base plate.
Box only – A tamper alarm is triggered only if the case is opened.
Box and Wall – A tamper alarm is triggered if the case is opened or removed from the wall. Select the Box and Wall
setting if the system is installed on a wall.
Guide the power and telephone cables into the case. Remember that you may want to incorporate control cables, and then
fix the base plate firmly to the wall using the screws provided.
Replace the PC board.
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FU9000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU9000 in the language / languages: English as an attachment in your email.

The manual is 2,51 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus FU9000

Abus FU9000 User Manual - English - 56 pages

Abus FU9000 Installation Guide - German - 96 pages

Abus FU9000 User Manual - German - 55 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info