755892
11
Zoom out
Zoom in
Previous page
1/43
Next page
11
Installation
Open the housing of the wireless
transmitter. Loosen the fastening screw on
the PCB, then lift the PCB carefully out of
the housing. Install the wireless transmitter
at the selected location. Screw the rear part
of the detector housing to the wall. Fasten
the PCB back into the housing, then insert
the lithium battery provided with the correct
polarity. Connect the cable of the water
sensor to the screw terminal of the
transmitter.
Fastening the water sensor:
Choose a location that will be flooded very
quickly in the event of water penetration.
Change the wireless transmitter settings as
required using the jumpers.
Setting possibilities
Jumper: Disable Tamp
The tamper contact on the detector is
inactive when this jumper is attached. You
can then open the detector housing without
triggering a tamper alarm.
Jumper: Disable View State
The LED lights up as soon as the sensor
detects water when this jumper is attached.
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus fu8330 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus fu8330 in the language / languages: English, German, Dutch, Danish, French, Italian as an attachment in your email.

The manual is 0,25 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info