692226
19
Zoom out
Zoom in
Previous page
1/71
Next page
19
Connector overview FU2938 (Standard)
Battery +
Red lead to battery
Battery -
Black lead to battery
Clamp strip
+12V (1)
+12V DC voltage supply
GND (2)
0V DC voltage supply
Strobe Trig (3)
Strobe control (with 0V DC in case of alarm)
Siren Trig (4)
Siren control (with 0V DC in case of alarm)
Tamper NC/NO (5/6)
Tamper relay output
potential-free
NC=normal state (normal closed)
NO=tamper (normal open)
Batt NC/NO (7/8)
Battery fault relay output, potential-free
NC=normal state (normal closed)
NO=battery fault
Connector overview FU2938 (radio version)
Battery +
Red lead to battery
Battery -
Black lead to battery
RJ-11 socket
PIN 1
Battery fault transistor output
+12V = normal state
0V = no battery connected or
Battery fault
PIN 2
+12V DC voltage supply
(If the voltage supply is not restored with 6h, the
siren + strobe are activated for 30s.)
PIN 3
0V DC voltage supply
PIN 4
Tamper transistor output
0V = normal state
open / high impedance = tamper
PIN 5
Strobe control 0V DC in case of alarm
(strobe is active when 0V DC signal is present)
PIN 6
Siren address 0V in event of alarm (siren is active is
0V DC signal is present, but only for max. 3 min)
Connected lines of connector clamp strip and RJ-11 socket
Clamp strip
RJ-11 socket
1
PIN 2
2
PIN 3
3
PIN 5
4
PIN 6
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FU2938 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU2938 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info