692226
16
Zoom out
Zoom in
Previous page
1/71
Next page
16
Wiring of compact alarm FU2938 (Standard)
Battery connection
When delivered, the internal battery is not connected. Connect the black
lead to the minus pole of the battery and red lead to the plus pole of the
battery.
Connecting the power supply
Connect the [+12V] and [GND] inputs with the 12V DC voltage supply.
Connecting alarm siren + strobe
1. The siren and the strobe are each activated by the presence of a
0V ground potential.
2. To trigger the strobe, connect the [Strobe Trig] input with an output
of your alarm centre. Since the strobe is activated by connecting a
ground potential, you can also control the strobe via a transistor
output of your alarm centre that switches to 0V in case of an alarm.
3. To trigger the siren, connect the [Siren Trig] input with an output of
your alarm centre. Since the siren is activated by connecting a
ground potential, you can also control the siren via a transistor
output of your alarm centre that switches to 0V in case of an alarm.
4. Note: Since the compact alarm has an automatic deactivation of
the acoustic alarm, [Strob Trig] and [Siren Trig] can also be
addressed via an output of the alarm centre.
Visual set acknowledgement
To enable optical signalling of alarm setting, the strobe is activated 35
times if the output of your alarm centre has the active acknowledgement”
property.
Connecting the tamper output of the compact alarm
Connect the [Tamper] output with the tamper line of your alarm centre.
Connecting the battery fault output of the compact alarm
Connect the [BATT] output with a zone of your alarm centre.
Remarks
Use only shielded and grounded cables (AZ6360 or AZ6361).
16


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus FU2938 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus FU2938 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info