755243
24
Zoom out
Zoom in
Previous page
1/32
Next page
24
Tipps zur Fehlerbehebung | Tips for troubleshooting | Conseils de dépannage | Tips voor fouten verhelpen
Consigli per l‘eliminazione guasti | Consejos para eliminar la solución de problemas
Fault / information Cause Solution
Aertheteach-inprocess,theLEDs
ashduringtherstlockingprocess
and a sustained acoustic signal sounds
The door was not closed during the
second part of the teach-in process
Repeat the teach-in process and close the
dooratthespeciedtime
TheLEDsashduringnormalservice
and a sustained acoustic signal sounds
- The door is not closed during operation
so the drive pushes the door bolt against
the door edge
- At least one battery is inserted the wrong
way round
-Thelockingmechanismisstiorthe
door is calibrated incorrectly
- Close the door and repeat operation
- Open the battery compartment and
check the polarity of the batteries/insert
the batteries correctly >> 6.1b
- Set the door correctly
Lubricate the locking mechanism
An acoustic signal sounds before every
rotational movement by the drive
The batteries are dead Change the batteries >> 6.
Before opening the door, the drive
carries out a reference movement
The door has since been manually
opened/closed using a key or the drive’s
handwheel has been turned
A reference movement is necessary to
identifythecorrectpositionaerthe
drive has been manually turned using
a key from outside or the handwheel
from inside.
Fehler / Information Ursache Lösung
Nach dem Einlernvorgang blinken beim
ersten Schließvorgang die LED und es
ertöntdauerhaeinakustischesSignal.
Die Tür wurde während zweiten Teils
des Einlernvorgangs nicht geschlossen
- Einlernvorgang >> 5.3 wiederholen und
Tür zum angegebenen Zeitpunkt schließen
Während der normalen Bedienung (5.6)
blinkendieLEDundesertöntdauerha
ein akustisches Signal
- Die Tür ist während des Betriebs nicht
geschlossen, so dass der Antrieb den
Riegel der Tür gegen die Türkante bewegt
- mindestens eine Batterie ist verkehrt
herum eingelegt
- die Schlossmechanik ist schwergängig
oder die Tür ist falsch eingestellt
- Tür schließen und Bedienung
wiederholen
-BatteriefachönenundPolaritätder
Batterien prüfen / Batterien richtig
einsetzen >> 6.1b
- Tür korrekt einstellen
Schlossmechanik schmieren
Vor jeder Drehbewegung des Antriebes
ertönt ein akustisches Signal
Batterien sind leer Batterien wechseln >> 6.
VordemÖnenderTürndeteine
Referenzfahrt des Antriebs statt
Es wurde zwischenzeitlich mit dem
Schlüsselmanuellgeönet/geschlossen
oder am Handrad des Antriebs gedreht
Keine Maßnahme notwendig.
Eine Referenzfahrt ist zur korrekten
Positionserkennung nach manueller Dre-
hung des Antriebes mittels Schlüssel von
außen oder Handrad von innen nötig.
7.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus CFA3000 HomeTec Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus CFA3000 HomeTec Pro in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 5,49 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info