Manual Abus CASA10010 (page 41 of 123) (English, German, Dutch, Danish, French)

554030

Zoom out

Zoom in

1/123

In the main menu, select menu item 6 with SELECT and confirm by

pressing SET. A double tone sounds and the LEDs indicate the

output groups. LED 1 is used for output group 1 and LED 2 for

output group 2. You can switch between the output groups using

SELECT and select one of the two groups using SET. A double

tone sounds. Output group 1 has three different statuses, whilst

output group 2 only has two different statuses.

Flashing Æ status message: The IP alarm module responds when

triggered (on output group 1 only).

Lights up Æ wireless output: The IP alarm module sends a switch

command to the wireless socket when triggered.

Off Æ internal siren/info module: The IP alarm module sends the

activation/deactivation command when triggered.

You can switch the individual status using SELECT and confirm by

pressing SET. A double tone sounds.

Now activate training mode for the corresponding components

(see the instructions for these components for more details). The

corresponding input on the IP alarm module must then be triggered

through the recorder. This now sends the training signal, which is

acknowledged by the components.

Select ESC/DEL after assigning the relevant status and training for

both output groups. The main menu of the IP alarm module is

accessed again.

5.9 Restoring the factory defaults

Proceed as follows to delete all settings in the IP alarm module and

all detectors:

In the main programming menu, select item 8 (LED 8 lights up).

Note: LED7 is deactivated in main menu. After selecting LED6 the

indicator moves next to LED8 in programming menu.

Confirm by pressing SET. All LEDs flash.

Keep ESC/DEL pressed until the IP alarm module emits a double

tone as confirmation and LED 8 lights up. The programming and all

trained wireless detectors are now deleted.

Note: To exit menu item 8 without making a factory reset, only

press ESC/DEL briefly.

After restoring the factory default settings, exit the programming

mode by pressing ESC/DEL.

The power supply LED lights up and the fault LED lights up.

The accessory module beeps at short intervals.

Close both tamper contacts of the IP alarm module and wait until it

emits a double tone.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus CASA10010 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 1,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus CASA10010 Manual

Product: