755883

Abus azwg10001 Manual

47
Zoom out
Zoom in
Previous page
1/118
Next page
47
AZWG10000
11. User functions
11.1 General
In addition to programming by SMS, you can also operate your GSM-Interface by
SMS commands. To ensure security, a 4-digit security code (default: 1234) is
required for access.
If this is not sufficient, you can also define that only the contacts stored in the device
are permitted to execute SMS commands (see programming of caller ID).
IMPORTANT:
- For security reasons, a user code (default: 1234) must be entered in the
SMS command.
- For SMS commands for exit and entry control, managing contacts and
resetting the SIM validity, you can receive an acknowledgement SMS from
the GSM-Interface. To obtain an acknowledgement, enter “!” after the user
code. Example: 1234 ! PO ON 1. The reply could be PO1 set (for
example).
- You can use spaces in the SMS commands, but they not mandatory.
11.2 Output control
The 4 outputs are switched either by events or by SMS commands. You can, for
example, send an SMS command to switch an output to activate lights or gates.
Command SMS structure
PO ON
Activate an output “CODE” “PO” “ON” “Number”
Example: 1234 PO ON 1
PO OFF
Deactivate an output “CODE” “PO” “OFF” “Number”
Example: 1234 PO OFF 1
11.3 Input control
The response of input control can be defined as either 24h type (always set) or
set/unset. You can change input control with an SMS command. If you select
set/unset, the default is unset and the input will not trigger a reaction if addressed.
Command SMS structure
SET
Arm all inputs. “CODE” “SET”
Example: 1234 SET
UNSET
Unset all inputs. “CODE” “UNSET”
Example: 1234 UNSET
… 47 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus azwg10001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus azwg10001 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info