755883
40
Zoom out
Zoom in
Previous page
1/118
Next page
40
AZWG10000
9.3 Displays
9.3.1 LED displays
LED Description
POWER (green) The Power LED shows the operating state of the
sounder.
ON: Voltage supply present in device.
OFF: No voltage supply present in device.
GSM (yellow) The GSM LED shows the state of the GSM
network.
ON: No GSM network found.
FLASHING: GSM network found and working.
OFF: No voltage supply present in device.
L.BAT (red) The “battery fault” LED signals a low battery level of
the standby power supply.
ON: Low battery level (under 11 V DC)
OFF: Battery level OK
9.3.2 GSM signal strength
After you insert the SIM card and connect power for the first time, the GSM-
Interface runs an automatic signal strength test.
In the first 30s after power is connected, the green POWER LED flashes 0-5 mal at
an interval of 5s. The number of flashing pulses tells you about the quality of the
GSM signal (see table).
If the signal is bad or too weak, try installing the device somewhere else.
LED Flashes GSM Network
signal level
5Very high
4High
3Medium
2Low
1Very low
0No GSM network
10. Programming
You can program the GSM-Interface easily with the GSM software on the
accompanying CD. Alternatively, you can program it with SMS commands from a
mobile phone.
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus azwg10001 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus azwg10001 in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info