643674
32
Zoom out
Zoom in
Previous page
1/118
Next page
32
AZWG10000
6
Connection for voltage supply from
power supply unit (14,5 V DC/ 0,8 A)
16
GSM antenna
7
Backup power supply (lead battery
(12 V DC / 1.2 Ah)
17
Connecting clamps for the
telephone connections (parallel-
switched to telephone socket)
LINE: analogue telephone line
SET: external devices
8
Socket for AZ6451 voice module
(optional)
18
Socket for external devices
(alarm system, external telephone,
etc.)
9
J10: connection for software
programming cable
19
Socket for analogue telephone
line (PSTN)
10
LEDs for GSM status (voltage, GSM,
battery low)
20
J15: Jumper for addressing inputs
(see 8.2 Inputs)
NR (default) = negative
triggering
PR = positive triggering
7. Installation
IMPORTANT:
- Install the device in a dry, protected place away from other radio and
electromagnetic devices.
- Make sure there is a power supply of 230 V AC near the installation
location.
9. Open the casing by removing the fixing screws and then removing the
front cover.
10. Use the base plate as drilling template for the four fixing holes at the
corners of the housing.
11. Drill the holes marked and insert wall plugs if necessary.
12. Pull the connection cables through the cable guides.
13. Screw the housing to the selected surface.
14. Screw the antenna supplied to the top of the housing.
15. Connect the battery (12 V/1.2 Ah) for the backup power supply.
16. After installing and programming, lock the housing.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus AZWG10000 GSM-Interface at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus AZWG10000 GSM-Interface in the language / languages: English, German, Dutch, Danish, French as an attachment in your email.

The manual is 0,61 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info