692216
12
Zoom out
Zoom in
Previous page
1/19
Next page
Installation
12
Installation
Installing the sounder
Step 1: Select installation location for the sounder
Select an installation location which:
is inaccessible to intruders and vandals.
is clearly visible, so that it acts as a strong deterrent.
can be reached with cabling.
Step 2: Open the sounder’s cover
Open the cover for the lid-fixing screws on the right side (see Fig. 1).
Remove the fixing screws and open the cover.
Step 3: Mount the sounder on the wall
Note
A pin serves as an anti-removal wall contact to activate the tamper switch on the inside
of the sounder. To fit uneven walls, the length of this pin can be adjusted. To do this,
turn the screw, which is in the pin, either in or out.
Place the siren on the wall and align it vertically using the integrated spirit level. Mark the
three fixing points.
Drill the holes in the wall to fit the diameter of the anchor screws. Insert the anchor screws
supplied, in the holes.
Feed the cable provided in the inner housing through the cable inlet on the reverse side.
Insert the screws supplied through the sounder’s fixing holes. Turn the screws in the screw
anchor. Do not tighten the screws yet.
Again, vertically align the sounder using the spirit level. Now tighten the screws.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abus AZSG10005 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abus AZSG10005 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus AZSG10005

Abus AZSG10005 Usermanual and installation guide - German - 19 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info