Manual Abus AZSG10000 (page 13 of 19) (English)

692215

Zoom out

Zoom in

1/19

Installation

Step 4: Pre-configuration via jumper

 If you would like to change

o the siren duration from the default value [3 min.], and/or

o the circuit monitoring from the default values, and/or

o you would like to set the volume differently to the default value, then:

 Slide the inner housing to the left, to release it from the catch.

 Now open the inner housing by undoing the screws at the top and bottom and set the values

using the jumpers [LK2] to [LK9] as required.

 Close the inner housing again using both screws.

 Snap the housing back into the mount by sliding it to the right.

 If you wish to set the mode for the power supply, open the terminal block and set the jumper

[LK1] accordingly.

Polarity:

+ve

Activated by positive signal, 12 V fitting.

-ve

Activated by negative signal, 0 V fitting.

Description of jumpers:

[LK1]

Select from SAB or SCB mode

[LK2]

Tamper notification with +ve or -ve polarity

[LK3]

Siren activation with +ve or -ve polarity

[LK4]

Flashing light activation with +ve or -ve polarity

[LK5]

Monitoring the signal for activating the siren and flashing light.

Please note the following instructions for this function.

[LK6]

Cyclical siren duration

[LK7]

Siren duration of 15 minutes

[LK8]

Siren duration of three minutes

[LK9]

Select siren volume from

STD = 100 dB(A) @ 1 m or

SPN = 85 dB(A) @ 3 m

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus AZSG10000 in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus AZSG10000

Abus AZSG10000 Usermanual and installation guide - German - 19 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus AZSG10000 Manual

Product: