Manual Abus AZ6300 (page 25 of 80) (English, German, Dutch, French, Italian)

702255

Zoom out

Zoom in

1/80

English

5. SD1+ connections

Before any connections are made to the SD1+, disconnect the power supply to

prevent damage to the electronics. The connections are provided as follows:

TRIG A: When triggered, the unit starts the dialling sequence and sends

message A.

TRIG B: When triggered, the unit starts the dialling sequence and sends

message B.

TRIG C: When triggered, the unit starts the dialling sequence and sends

message C.

ABORT / D: This connection can be used to abort the dialling sequence or used

as an additional alarm input for alarm text D. The configuration of

this input is done via the programming menu (see the programming

and operation manual).

All inputs are activated either with +12V or 0V. The polarity (valid

for all inputs) is set using the "TRIG POLARITY” jumper-link on

the main circuit board.

TAMP: These two terminals can be connected to the tamper zone on the

alarm control panel so that the control panel can detect tampering

when the housing of the unit is opened.

0V: Earthing connection to the alarm control panel

+12V: +12VDC power supply from the alarm control panel

(or external power unit).

O/P1: programmable open collector transistor output (max. 100mA) which

switches earthing (0V).

Enfocus Software - Customer Support

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abus AZ6300 in the language / languages: English, German, Dutch, French, Italian as an attachment in your email.

The manual is 4,89 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abus AZ6300

Abus AZ6300 User Manual - English, German, Dutch, French, Italian - 140 pages

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abus AZ6300 Manual

Product: