472190
36
Zoom out
Zoom in
Previous page
1/39
Next page
36
- used gel is not
water-based
- the belt is positioned
Incorrectly
- Belt is worn or has
oil deposits.
- Battery is low
that you use. Make
sure you find “water”
or “aqua” on it.
- Move belt around to
locate your trigger
points.
- Clean conductive
pads or replace. (see
hint below)
- Change Battery
LCD Display
lights up, but
all buttons do
not work
- Microprocessor hang
up
- Battery is low
- Perform a RESET,
remove batteries for 1
minute for full RESET
- Change Battery
Tip: You can determine whether your conductive pads are worn out
and need replacing or whether the electronic unit does not generate
sufficient output power. Simply unsnap the unit from the belt. Place a
little bit of conductive gel on the tip of the pointing and ring finger
of
one hand and press your fingers against the contacts of the unit.
Switch the unit on and
carefully increase intensity to level one or two.
If the unit is working properly you will feel a tingling sensation in your
fingers which indicates that you need to get new conductive pads.
IMPORTANT: POWER RESET
If the unit does not switch on, or if you can’t change to different
programs, the microprocessor may have “hanged”. Please perform a
simple RESET. Remove batteries and replace them after one minute.
Design and Engineering in Germany.
Copyright © 2008, AbTronicX2
36


Need help? Post your question in this forum.

Forumrules
1

Forum

abtronic-x2-fitness-belt

Reset search

  • What does the belt come with? Cause I only have one snap on pad for the front and not one for the back Submitted on 7-4-2017 at 23:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abtronic X2 Fitness Belt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abtronic X2 Fitness Belt in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info