472190

Abtronic X2 Fitness Belt Manual

13
Zoom out
Zoom in
Previous page
1/39
Next page
Timer
Default time is 10 minutes. Press the UP/DOWN button once to
increase or decrease the time increment. Maximum time is 45 minutes.
11. To switch the unit off, press and hold the ON/OFF button for three
seconds.
12. To turn the sound on/off, press and hold the FUNCTION and
ON/OFF button for 2 seconds. The display will show the ‘sound
off’ icon
Auto Functions
If the conductive area of the belt (the grey area on the back of the belt)
does not touch the skin, the intensity can only be set up to “1”. An
alarm will sound after 2 seconds and the unit will automatically switch
off. If the belt is removed during use, the intensity is automatically reset
to “1”. If the belt is not immediately placed back into contact with the
skin, the unit will automatically turn off after 20 seconds. The
AbTronicX2 unit has an auto-timer. It will automatically switch off after
10 minutes of exercise. If you change the exercise mode during the 10
minute exercise period, the timer will continue to count-down from the
original leftover time.
What to do if you do not feel any muscle contraction
If no muscle contractions are felt, move the belt slowly around the area
that you want to target. Make sure you have enough AbTronicX2
slimming gel placed on the inside of the neoprene belt. Gradually
increase the PULSE INTENSITY by pushing the UP button for each
channel in the mode until muscle contraction is felt.
The AbTronicX2 dual channel belt is a great way to exercise your
muscles. It may take a few moments of practice to locate the belt
correctly and apply the ideal pressure that will produce the best results
for you.
Tip! If there is not enough gel on the belt or the belt is not placed
tightly against the skin, you may experience an uncomfortable tingling
sensation. The same thing will happen if the conductive pads are worn
and have lost good conductivity.
13
… 13 …


Need help? Post your question in this forum.

Forumrules
1

Forum

abtronic-x2-fitness-belt

Reset search

  • What does the belt come with? Cause I only have one snap on pad for the front and not one for the back Submitted on 7-4-2017 at 23:16

    Reply Report abuse


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abtronic X2 Fitness Belt at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abtronic X2 Fitness Belt in the language / languages: English as an attachment in your email.

The manual is 3,16 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info