588212
15
Zoom out
Zoom in
Previous page
1/40
Next page
15
EN
Installing the Wheels:
Insert the screw through the wheel. Place the 10mm washer
over the screw.
Insert the screw with the wheel into the housing and fix it with
the star washer and nut.
10. FUSES
If the breaker releases upon overload, push the breaker back in until it clicks into place.
Note: please wait at least 2 minutes before attempting to reset the breaker (required cooling time).
All chargers feature an additional thermal safety circuit. This thermal safety circuit protects the charger from extreme
overload and overheating resulting from improper operation. In such cases, the charger will power off automatically
and then back on again after cooling down for approx. 10 to 15 minutes.
If the polarity is reversed, the fuse will blow and will need to be replaced. You can find it behind the black fuse holder
cover on the back panel of the device. Spare fuses are supplied with the device.
The charger can also power off if the battery is exceptionally discharged and demands a very high charging current.
If your device features a current selector switch, please start the charging process on level 1 or 2. After approx. half
an hour you can increase the charging current.
11. KEEP YOUR BATTERY IN GOOD CONDITION
You can significantly extend the battery life by following these tips:
Check the electrolyte level monthly and, if necessary, add distilled water. The charging status can be controlled with
a densitometer. Do not allow the battery poles to become sulphatised. Clean the poles regularly and apply a little
grease. If you only drive short distances or in town, your battery becomes extremely loaded. If you use your vehicle
rarely, the battery is subject to self-discharge. You should therefore regularly check the optimum charging status of
your battery to assure a long battery life. Regular maintenance translates into cost-effectiveness.
ManuakGL_V03.indd 15 22.12.2010 11:35:51 Uhr
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Absaar SLS at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Absaar SLS in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info