588211
13
Zoom out
Zoom in
Previous page
1/40
Next page
13
EN
5. DIGITAL VOLTS-AMMETER
The SL and SLS series feature a digital voltage / current toggle
instrument.
The built-in voltage/amperage instrument lets you monitor the current charging status of your battery at any time.
Toggle between voltage and amperage to see if the battery has reached the desired voltage / charging current. When
reaching a voltage of 7.2V (6-Volt battery), 14.4V (12-Volt battery) or 28.8V (24-Volt battery) or whenever the charging
current is lower than < 500mA, your battery is fully charged. The charging current supplied to the battery and the
charging time depend on the battery status. The charging current will thus never be constant during the entire char-
ging process but will decrease gradually as the charging level increases. When connecting the charger to an empty
battery, the charging current will be high. As the charging level increases, the charging current will decrease.
6. TIMER (SLS CHARGER SERIES)
The built-in timer allows the charger to be automatically powered off after the set
time. This means that the charging process must not be terminated manually.
A battery of a capacity compatible with the charger and discharged by 50% can be
fully recharged within 8 to 10 hours. Set the desired charging time (hours) by turning
the dial knob. After the set time has elapsed, the charger will power off.
7. GETTING STARTED
•Beforepoweringthedeviceon,youshouldascertaintherequiredcurrentsetting.
•Connectthepositiveclamp(redcable)ofthechargertothepositivebatterypole.
•Connectthenegativeclamp(blackcable)ofthechargertothenegativebatterypole.
•Connectthepowercordtoa230Vwalloutlet.
•Setthedesiredchargingvoltage(6/12/24V).
•Setthechargingcurrenttothedesiredvalueandpowerthechargeron.
An empty battery needs approx. 5 to 10 hours for recharging. The charging time depends on the battery status.
CAUTION: SL and SLS series chargers have no automatic charging control: they do not power off automatically after
the charging process has finished. It is therefore necessary to monitor the charging process in order to power the
charger off and disconnect it from the battery once the battery is fully charged. If you leave the device connected to
the battery for too long, damage to the battery will occur.
SLS chargers have a timer that will power off the device after the set time (hours). We recommend that you use this
feature.
aMP
VolT
ManuakGL_V03.indd 13 22.12.2010 11:35:50 Uhr
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Absaar SL at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Absaar SL in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 2,53 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info