588204

Absaar KLB Manual

13
Zoom out
Zoom in
Previous page
1/40
Next page
13
EN
CURRENT SELECTOR SWITCH
If your charger does not have a current selector switch:
The charger will detect the required battery charging current automatically.
N/E Switch ( Normal / Express Charge ):
Depending on the battery charger type it may feature an NORMAL – EXPRESS switch. Setting the
switch to the NORMAL position will charge the battery with a lower charging current, resulting
in a longer charging time. This position is intended for batteries with very low capacities. Normal
charging will extend the battery life. The EXPRESS position will supply a charging current up to the
maximum current.
A/M Switch ( Automobile / Motorbike ):
Depending on the battery charger type it may feature an AUTOMOBILE – MOTORBIKE switch.
The Motorbike position will supply a lower charging current to charge batteries with a capacity
between 5 and 15 Ah.
0
VOLTAGE SELECTOR SWITCH
If your charger does not have a voltage selector switch:
The charger will only supply the specified voltage.
Voltage Selector Switch ( 6V / 12V ):
The 6 Volt / 12 Volt selector switch allows you to charge 6 Volt or 12 Volt batteries.
Please always make sure that the charger voltage and battery voltage match.
Check the battery voltage before starting the charging process. 3-cell batteries typically have a
nominal voltage of 6 V. 6-cell batteries typically have a nominal voltage of 12 V.
Voltage Selector Switch ( 12V / 24V ):
The 12 Volt / 24 Volt selector switch allows you to charge 12 Volt or 24 Volt
batteries.
Please always make sure that the charger voltage and battery voltage match.
Check the battery voltage before starting the charging process.
6-cell batteries typically have a nominal voltage of 12 V.
12-cell batteries typically have a nominal voltage of 24 V.
0
225
JUMP
START
180AMP
12 Volt
6 Volt
AMPERE
0 3 6 9 12
AMPERE
0 10 15 20 3025
CHARGING CURRENT INDICATOR FOR STANDARD CHARGERS
Ammeter:
The ammeter indicates the battery charging current. The charging current supplied to the battery
depends on the battery status. The charging current will thus never be constant during the entire
charging process but will decrease gradually as the charging level increases. When connecting the
charger to an empty battery, the charging current will be high. The ammeter needle will indicate a
value on the right of the gauge.
As the charging level increases, the charging current will decrease. The ammeter needle moves to
the left of the gauge, indicating that the charging process has finished. The battery is fully charged.
The ammeter is only an indicator for monitoring the charging cycle.
… 13 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Absaar KLB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Absaar KLB in the language / languages: English, German, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 3,7 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info