Manual Absaar HF1206 (page 6 of 27) (English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish)

588202

Zoom out

Zoom in

1/27

1. Charging indicator - yellow LED, when battery is charging the yellow LED is lit

2. Full charge indicator - green LED, when the battery is fully charged or the charger switches into oat charge

mode, the LED is lit; and when there is no load in the circuit, it also illuminates.

3. Reverse polarity indicator - red LED, when battery clips are wrongly connected to the battery the LED is lit.

4. Slide switch - You can select charging current by moving the slide switch as required.

The chart shows the charging current for the recommended battery capacity for your reference.

Charge rate Battery capacity recommended

2A Up to 30 Ah

4A Up to 75 Ah

6A Up to 110 Ah

5. Ventilation openings - Be sure the ventilation openings are free from obstruction.

6. DC cable - DC output cable with red (+) and black (-) clamps for connection to the battery.

7. Power cable - connect to a standard 230V AC power outlet.

8. Cooling fan - automatic built-in high-speed cooling fan.

OPERATION INSTRUCTIONS

· Ensure the battery charger is disconnected from the power supply.

· Connect the red charger clamp to the positive terminal of the battery (+) symbol.

· Connect the black charger clamp to the negative terminal of the battery (-) symbol.

· Choose the correct current to match the battery you wish to charge with the slide switch.

· Plug the charger into the AC mains power. The yellow LED will light up showing that the

battery is charging.

CAUTION: If the yellow charging light turns off and the red light turns on, immediately

disconnect from the AC mains power, check the polarity of the battery clips to the battery

terminals.

CAUTION: If output voltage becomes very high, the relay switches to protect against dam-

aging and shortening the life of the battery. When the voltage returns to normal, the relay

will automatically reset.

· When fully charged, the green LED light turns on. The recharge time will vary based on

the capacity and discharge state of the battery.

· Disconnect the power supply cable from the standard AC mains power outlet.

· Disconnect the black charge clamp from the negative terminal of the battery (-) symbol.

· Disconnect the red charge clamp from the positive terminal of the battery (+) symbol.

· Store the battery charger in a dry place.

INTRODUCTION

Thank you for purchasing an Absaar HF-1206 charger. It is designed to charge 12V (typically six 2 volt cells,

for detailed information refer to the battery manufacturer) rechargeable lead-acid, VRLA maintenance free (gel

and AGM) batteries with a battery capacity up to 110Ah. It is not designed to charge 6V or 24V batteries.

· The charger includes automatic protection features to ensure safety:

· Short circuit protection

· Reverse polarity protection

· Over heating protection

· Over voltage protection

· Automatic fan control

· LED indicators display charging, oating mode and reverse polarity status

THREE-STAGE BATTERY CHARGING

Multi-stage charging ensures batteries receive optimum charging:

1) Current charge

2) Constant charge

3) Floating charging

IMPORTANT SAFETY INFORMATION

Misusing or incorrectly connecting the HF-1206 battery charger may damage the equipment, on-board elec-

tronics, or create hazardous condition for users. Read the safety instructions and pay special attention to all

Cautions and Warning statements in the guide. Please keep this manual for future reference.

FEATURES

CONTENTS

ntroduction 10

Important Safety Information 10

Features 10

Operation Instructions 11

Troubleshooting 12

Specications 12

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Absaar HF1206 in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 3,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Absaar HF1206 Manual

Product: