680514
9
Zoom out
Zoom in
Previous page
1/20
Next page
7
Read the operating instructions carefully
before installing and commissioning. Keep
the operating instructions handy for future
use.
Product description
The remote key-pad for mounting externally
can control 4 different self-learning 433 MHz
receivers. 3 radio signals are protected with
individually programmable 2-6 digit numeric
codes. After entering the proper code, any
amount of signals can be sent. 20 seconds
after the last entry, the remote key-pad is
locked automatically. All access codes can
be deleted using a reset function. 1 radio
signal is sent by pressing the ring-button
(Bell symbol). Note: If all 3 access codes are
programmed, reprogramming can only be
done after performing a reset.
Packaging
Only reusable materials are used. Dispose
of packaging in an environmentally-friendly
way and according to the legal guidelines in
your area.
Safety information
Improper or accidental operation of the
devices and functions controlled by the
remote key-pad must be prevented. Master
and / or access codes are not to be noted on
the remote key-pad. Mount the remote key-
pad outside of the reaching distance of
children. Ensure that the device to be
controlled will pose no hazard before every
operation.
Intended usage, Guarantee
The manufacturer must provide written and
exclusive approval for:
•Modifications or attachments
•Repairs performed by persons or
businesses that have not be authorised
by the manufacturer
If this approval is not granted, the guarantee
and warranty can become void. No liability
can be assumed for damages that result
from not observing the information in the
operating manual.
Instructions
for installation, programming, operation and
resetting the remote key-pad can be found
starting on page 14.
Service and maintenance
Do not use acidic or paint-dissolving
cleaning solvents.
Technical data
Removal, Disposal
Removing the remote key-pad is
performed in the opposite
sequence to that in the
installation instructions. Dispose
of the device according to
environmental guidelines.
EU Declaration of conformity
The described remote key-pad conforms
with all basic requirements according to
Article 3 of R&TTE 1999/5/EG. The following
provisions and standards were utilised:
EN 300220-V1.1.1.,
EN 3001489-03 V1.4.1., EN 60950-1,
EN 50371: 2002
ABON Antriebe und Sicherheitssysteme
GmbH
Thalbach
D-85368 Wang
Hermann Leppert Executive director
03.01.2005
Power supply 9V battery
Transmission frequency 433 Mhz, 4 channels
Housing Plastic, Coated, IP55
Dimensions (WDH) 82 x 30 x 82 mm
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abon 433 MHz Remote Key-pad at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abon 433 MHz Remote Key-pad in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,62 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info