680515
8
Zoom out
Zoom in
Previous page
1/19
Next page
6
Read the operating instructions
carefully before installing and
commissioning. Keep the operating
instructions handy for future use.
Product description
The remote key-pad for mounting externally
can control 4 different self-learning 433 MHz
receivers. Three radio signals are protected
with individually programmable 1-6 digit
numeric codes. Once the correct numeric
code has been entered, any number of signals
can be sent. This repeat function can be
interrupted to enter a different numeric code
by pressing the key button. 8 seconds after the
last entry, the remote keypad is locked
automatically. All access codes can be
deleted using a reset function. 1 radio signal is
sent by pressing the ring-button (Bell symbol).
Note: If all 3 access codes are programmed,
reprogramming can only be done after
performing a reset.
Packaging
Only reusable materials are used. Dispose of
packaging in an environmentally-friendly way
and according to the legal guidelines in your
area.
Safety information
Improper or accidental operation of the
devices and functions controlled by the remote
key-pad must be prevented. Master and / or
access codes are not to be noted on the
remote key-pad. Mount the remote key-pad
outside of the reaching distance of children.
Ensure that the device to be controlled will
pose no hazard before every operation.
Intended usage, Guarantee
The manufacturer must provide written and
exclusive approval for:
•Modifications or attachments
•Repairs performed by persons or
businesses that have not be authorised by
the manufacturer
If this approval is not granted, the guarantee
and warranty can become void. No liability can
be assumed for damages that result from not
observing the information in the operating
manual.
Instructions
for installation, programming, operation and
resetting the remote key-pad can be found
starting on page 14.
Service and maintenance
Do not use acidic or paint-dissolving cleaning
solvents.
Battery replacement
If the battery capacity is too low, the keypad
lighting flashes and is then turned off.
Removing the battery: See installation from
page 14.
Technical data
Removal, Disposal
Removing the remote key-pad is
performed in the opposite
sequence to that in the installation
instructions. Dispose of the device
according to environmental
guidelines.
EU Declaration of conformity
The described remote key-pad conforms with
all basic requirements according to Article 3 of
R&TTE 1999/5/EG. The following provisions
and standards were utilised:
EN 60950 / EN 300 220-1/-3, EN 301 489-1/-3
Cardo Door Production GmbH
Normstahlstraße 1-3
D-85368 Moosburg
Dr. Wolfgang Schulz Executive director
02.01.2009
GB
Power supply 9V battery
Transmission frequency 433 Mhz, 4 channels
Housing Plastic, Coated, IP55
Dimensions (WDH) 82 x 40 x 102 mm
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abon 433 MHz Remote Key-pad 2009 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abon 433 MHz Remote Key-pad 2009 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 0,67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info