237987
11
Zoom out
Zoom in
Previous page
1/28
Next page
2. Hardware Installation
2.1 System Requirements
Before installing WLP-01, make sure your system meets the following requirements.
A motherboard with PCI Express Slot
Minimum 64MB system memory
Operating system
Station mode: Windows XP/Server 2003, Windows XP/Server 2003 x64
AP/wireless bridge mode: Windows XP/Server 2003
An optical drive for utilities and driver installation
2.2 Hardware Installation
The WLP-01 package comes together with an omni-directional portable antenna to extend its
maximum operating range.
1. Power off your system before installing
the WLP-01 card.
(This picture is for reference only, and may have
size, shape, or parts differences in the antenna or
WLAN card itself.)
2. Locate one available PCI-E X1 slot on
your motherboard. (Due to each
motherboard’s different designing,
it is recommended to install the
WLP-01 card on PCI-E X1 slot, so as
to avoid degrading the speed of the
PCI-E X16 card.)
3. Plug the WLP-01 card with its
connector-side vertically down into the
slot. (Avoid touching the connector
(golden fingers) when holding the
WLP-01 card.)
4. Secure the WLP-01 card by its bracket
onto the chassis’s rear I/O panel.
5. Connect the cable-end from the external antenna to the antenna port on WLP-01 card.
6. Place the antenna at an elevated spot. A wide and open position will help to increase the
operating range.
WLP-01 7
11


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abit airpace wi fi at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abit airpace wi fi in the language / languages: English as an attachment in your email.

The manual is 0,97 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info