677230

Abilia REC1 Gewa Andromeda 4198XX Manual

14
Zoom out
Zoom in
Previous page
1/36
Next page
14
Power supply
The receiver is powered with 12-24V AC/DC (-10% - +20%).
Simple programming
Gewa Andromeda is designed to be easy to program. Follow the instructions below for
programming the most common uses.
The IR-receiver can be programmed with GewaLink-channels 0-127 (channel 62 has no
function) or one coded channel (4096). The selection is also made during programming
whether a particular relay is to function in a monostable or a bistable manner.
A Gewa IR-transmitter is required to program the receiver.
Monostable functioning = The relay is activated as long as the key on the IR-transmitter is
held down.
Bistable functioning = The relay is activated when the key on the IR-transmitter is held
down and releases. The second time the key is held down and released, the relay will be
deactivated.
Warning!
The relevant relay is activated during the programming. This may cause an inadvertent
activation of some equipment.
Program relay for IR and Monostable functioning
1. Press the selected key on the IR-transmitter and, at the same time, press the
programming button for the relay, Btn1 on the IR-receiver.
2. Wait until the indicator lamp flashes and the relay is activated.
3. Release the programming button (within 2 seconds) and the key on the IR-
transmitter.
4. Check the function by pressing the selected key on the IR-transmitter.
Program relay for IR and Bistable functioning
1. Press the selected key on the IR-transmitter and, at the same time, press the
programming button for the relay, Btn1 on the IR-receiver.
2. Wait until the indicator lamp flashes and the relay is activated. Keep the button/key
pressed for 2 seconds.
3. Release the programming button and the key on the IR-transmitter.
4. Check the function by pressing the selected key on the IR-transmitter.
If you are not satisfied with the selected channel (key on the IR-transmitter) or function,
simply repeat the procedure. Remember that if the programming button is held down for less
than 2 seconds, the relay is programmed with a monostable function. If it is held down for 2
seconds, the relay is programmed with a bistable function.
… 14 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia REC1 Gewa Andromeda 4198XX at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia REC1 Gewa Andromeda 4198XX in the language / languages: English, German, French, Swedish as an attachment in your email.

The manual is 0,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info