Scanning Control
It is possible to connect external scanning control switches to enable control of
241 functions via a single switch. Settings can be programmed such as different
scanning methods, scanning speed, scanning start, number of scanning
repetitions, turbo scanning and scanning blink. It is even possible to create an
individual scanning method. 1-5 control switches or joystick can be connected
depending on scanning method. Read the section below for a description.
Connecting Control Switches
There are several ways of connecting control switches depending on the number
of switches that will be needed. It is possible to connect one or two 1-function
control switches to Sw 1 and Sw 2. At input Multi you can connect control
switches for all four directions and Enter. It is possible to control 8 directions
and Enter with a Joystick.
1 control switch: Input Sw 1, Sw 2 or Multi. All terminals can be used when
only one control switch is used.
2 control switches: Input Sw 1 () and Sw 2 ().
3 control switches: Input Sw 1 (), Sw 2 () and Multi (Enter).
Alternatively all three control switches can be connected to Multi.
5 control switches: Input Multi (, , , and Enter).
Enter: Execute by pressing the control switch connected to Multi (Enter).
You can also execute by using Sw 1 or Sw 2 depending on what scanning
method you have chosen. See table 4!
Joystick with 8 directions + Enter: Input Multi.