677159
10
Zoom out
Zoom in
Previous page
1/48
Next page
10
transmitters only emit a short flash each time the key is pressed. In these
cases, press several times.
5. Press and release the key on Control Prog that is to be programmed. The
indicator light for the level key now emits a steady orange light.
6. Press and hold the corresponding key on the original transmitter pressed.
Release the key when the indicator light for the level key gives a green light.
This might take up to 10 seconds. If the indicator light goes orange again
press the key one or more times until it flashes green and goes out. If the
indicator light flashes red the programming has failed. Try once more from
step 4. If a beep
is heard the level is locked and no programming can be
made. Read the next section how to unlock a level.
7. If the programming of the first key was successful, repeat steps 5 and 6 until
all keys are programmed. Finish by pressing
---
. The indicator light for the
level key flashes green to show that the programming is complete.
8. Now test the programmed functions on the device that is to be controlled.
Quick guide
Programming:
P
+
1
,
X
,
Y
, ….
---
Tip! Control Prog can record codes from most IR transmitters on the market
with a few exceptions. You may have problems with a few or all of the functions
for a certain IR transmitter. In these cases it is possible to try another recording
method. Instead, do as follows in step 4; Press
P
and
1
at the same time but
keep them pressed for approximately 2 seconds until the indicator light for the
level key flashes green and goes out. Control Prog is now in another recording
mode. Otherwise use the same recording procedure.
Locking/Unlocking Delete Protection
In order to protect codes from being deleted by accident when new codes are
programmed it is possible to lock each level separately. Locked level is
indicated by a beep
and no programming can be made. Do as follows to
lock/unlock levels:
1. Press
P
and
---
at the same time. The indicator light for the level key and the
current level are now lit.
2. Change to the level to be locked/unlocked by pressing
---
as many times as
needed.
3. Press
3
to lock or
4
to unlock. The indicator light for the levels is
automatically moved to the next level, which thereby can be locked/unlocked
immediately.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia Manual Control at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia Manual Control in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Abilia Manual Control

Abilia Manual Control User Manual - German - 48 pages

Abilia Manual Control User Manual - Dutch - 48 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info