677171
6
Zoom out
Zoom in
Previous page
1/20
Next page
6
3.2 Software Installation
1. Launch setup.exe and follow the instructions.
2. On a first-time installation, please run the Monitor Calibration program:
In order to ensure the highest gaze
accuracy over a large working range, the
physical setup of the system needs to be
calibrated once, when the system is being
integrated.
Most Cameras will be attached to the
monitor using a ”VESA mount”.
The interactive sketch will assist you in
locating the requested measurements.
For later updates, the Monitor Calibration
program can be found in the IntelliGaze
program group.
In a dual-monitor setup, please make sure the camera is attached to the primary
display!
3. Plug in the camera and wait until a Windows message confirms the installation of
alea technologies drivers.
The device manager now lists the camera driver in the USB section, additionally the
Internal Camera Status LED (8) turns yellow.
4. Start IntelliGaze, and position yourself centered about 60cm (2ft.) from the camera.
Open the Operation Center and verify the proper functioning by checking the
Tracking Status Monitor: stable green smiley and no error messages. The smiley
should follow your head movements without significant delay or stutter.
The Tracking Status Monitor reacts on touch and will provide more details or
options in case of problems.
5. The basic IntelliGaze system has now been installed.
3.3 Setting System Preferences for Desktop Control
Start IntelliGaze and open the preferences dialog (i.e. Ctrl-F11 or via Operation Center).
General - Select your language and ensure that the camera license matches your
requirements.
Integrated Keyboard - Select your preferred keyboard layout(s).
Input - adapt the preferred input option(s), i.e. dwell or blink click or/and switches.
This will be the ‘triggers’ which can be used in application profiles.
If Windows should provide gaze input right after boot-up, you will have to add
IntelliGaze to the Startup folder.
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia IntelliGaze at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia IntelliGaze in the language / languages: English as an attachment in your email.

The manual is 1,05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info