Manual Abilia 808620 - IR-LIFT MAXI (page 18 of 32) (English, Swedish)

677231

Zoom out

Zoom in

1/32

18 (32)

GB Installation Instructions

Introduction

The lift indicator IR-LIFT MAXI makes possible the wireless control of lifts

using an IR transmitter. IR-LIFT MAXI has a built in display. The lift indicator

is started by pressing a button on the transmitter, and this shows the various

floors in sequence. When the right floor is displayed, the button on the

transmitter is pressed again. The lift now starts and moves to the floor selected.

This procedure allows persons with disabilities to control a lift without using the

lift's control buttons.

Installation Instructions

These instructions describe the steps involved in installing the lift indicator IR-

LIFT MAXI and the associated equipment. The normal instructions that are

delivered with the IR receiver are not to be used. They must be replaced by

these instructions. The IR-LIFT MAXI will be denoted simply by "the lift

indicator" in the remainder of this document.

Descriptions of Components

The lift indicator: The lift indicator is a display with a built-in IR detector. This

component is mounted in the wall panel inside the lift cage. The lift indicator

must be connected to an IR receiver and a power supply in order to work.

IR receiver: The IR receiver (IR-16M 24V or IR-8M 24V) is mounted on the

roof of the lift cage. The relay outputs are connected to the lift functions for

selection of floor, an alarm signal and opening the door. Each IR receiver can

control 8 or 16 functions. Several IR receivers can be mounted in parallel, if

further functions are to be controlled.

Power supply: The lift indicator and the IR receiver are supplied with 24 V DC

power from an external power supply or from the internal power supply in the

lift. No other voltage should be used.

IR transmitter: All GewaLink transmitters that transmit on channels 00-61 and

63-127 can be used to control the lift and the lift indicator.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 808620 - IR-LIFT MAXI in the language / languages: English, Swedish as an attachment in your email.

The manual is 0,32 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abilia 808620 - IR-LIFT MAXI Manual

Product: