677239

Abilia 808415 IR8M Manual

10
Zoom out
Zoom in
Previous page
1/20
Next page
10
Programming
When using programming or quick programming mode all 8 switches to set
channel groups must be in "off" position on upper and lower board. Switch the
programming/permanent position switch to "on". Decide whether the relay is to
have a bistable or a monostable function by using the bistable/monostable
function switch. Activate the desired channel on the IR transmitter at the same
time as you press the programming button for relay 1. The receiver relay is
activated and the indicator lamp flashes twice thus confirming the
programming.Relay 1 is now programmed. Do the same thing for the second
relay of the receiver but this time using programming button for Relay 2 and
another transmitter channel and so on. If you are not satisfied with the selected
channel repeat the process. Warning! The corresponding relay is activated
during programming. GewaLink channels 0-127 (channel 62 has no function),
4096 codes and Infra-code can be programmed.
Quick Programming
Switch the programming/permanent position switch to "On". Decide whether the
relay is to have a bistable or a monostable function by using the
bistable/monostable function switch. Activate the first channel of the IR
transmitter at the same time as you press two optional programming buttons. All
the receiver relays are activated and the indicator lamps flashes twice thus
confirming the programming. It is possible to reprogram each particular relay
afterwards from monostable to bistable function or vice versa.
Permanent Channel Setting
The channel switches 1 - 8 can also be permanently set without programming.
Set the programming/permanent setting switch to "Off". Set the channel groups
according to the enclosed table. Choose monostable or bistable function using
the monostable/bistable switch. NOTE! All relays will work according to the
chosen setting, i. e. they will have monostable or bistable function.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Abilia 808415 IR8M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 808415 IR8M in the language / languages: English, German, French, Swedish as an attachment in your email.

The manual is 0,24 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info