Manual Abilia 808412 - GL-4M (page 9 of 12) (English, Swedish)

677236

Zoom out

Zoom in

1/12

Programming

The IR receiver can be programmed with GewaLink channels 0-127 (channel 62 has no

function) or one coded channel (4096). There is one programming button for each relay. The

selection is also made during programming whether a particular relay is to function in a

monostable or a bistable manner.

Monostable functioning = The relay is activated as long as the key on the IR transmitter is

held down.

Bistable functioning = The relay is activated when the key on the IR transmitter is held down

and releases. The second time the key is held down and released, the relay will be deactivated.

Warning! Gewa AB advise against using bistable control of the window opener as there is a

risk of entrapment of fingers, limbs etc.

Program the receiver as follows:

Press the selected button on the IR transmitter and press at the same time one of the

programming buttons on the IR receiver. If the programming button is held down for

approximately 1 second, the unit is programmed with a monostable function. If it is held

down for approximately 2 seconds, the unit is programmed with a bistable function.

The receiver confirms the programming by activating the relay and causing the indicator lamp

to flash. Simply repeat the procedure if the selected channel or function is not satisfactory.

Warning! The relevant relay is activated during the programming. This may case an

inadvertent activation of some equipment.

Attaching the Lid

It is possible to fix the lid of the GL-4M model, with the included screws.

Cleaning

Dip a rag into water with a little washing-up liquid in it and wring it out well. This can then

be used to clean the outer casing of the receiver.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 808412 - GL-4M in the language / languages: English, Swedish as an attachment in your email.

The manual is 0,22 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abilia 808412 - GL-4M Manual

Product: