Manual Abilia 808140 - IR-5SP (page 20 of 24) (English)

677221

Zoom out

Zoom in

1/24

Data Communication

Transferring Data between Two IR-5SP Transmitters

You can easily transfer all programmed channels and settings from one IR-5SP

to another. This can be done for instance before servicing a transmitter or when

replacing a transmitter. Before transferring data you must understand the

following limitations.

 If the transmitters have the same program versions, transfer is possible

without any problems. Look at the back of IR-5SP to check the program

version e g, Ver:1.0a.

 If the transmitter has a different program version and is to be permanently

used, the memory contents must be updated if you want to be sure that all

functions are included. To do this connect IR-5SP to a computer which then

updates the contents of the memory. Read next section for more information

about data transfer between IR-5SP and a computer.

To transfer data, do as follows:

1. Remove the lower part loosening the screw on the back of each of the two

transmitters.

2. Make sure that the batteries in both transmitters have full capacity.

3. Connect a data cable (Article no: 406922) to pin strip on the IR-5SP printed

circuit board in both transmitters.

4. Press

and

at the same time and then

on the transmitter that will

receive data. To prevent the battery from coming loose you will have to push

the battery towards the contact springs with a finger at the same time as the

keys are pressed. After approximately 15 seconds the transfer is finished.

Quick guide

Transfer of data between two transmitters:

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Abilia 808140 - IR-5SP in the language / languages: English as an attachment in your email.

The manual is 0,5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Abilia 808140 - IR-5SP Manual

Product: